2017-D George Rogers Clark Quarter Value: What Is It Worth?
The 2017-D George Rogers Clark Quarter is worth anywhere from $0.25 in circulated condition to over $15 for high-grade uncirculated specimens. While most of these Denver-minted coins found in your pocket change are only worth face value, certain “Mint State” examples and error coins can command a surprising premium from dedicated collectors.
| Condition Grade | Estimated Market Value |
|---|---|
| Circulated (Average Wear) | $0.25 |
| About Uncirculated (AU58) | $0.35 – $0.50 |
| Uncirculated (MS63) | $1.00 – $3.00 |
| Gem Uncirculated (MS65+) | $15.00+ |
A Brief History of the 2017 George Rogers Clark Quarter
The 2017 George Rogers Clark National Historical Park quarter is the 40th release in the “America the Beautiful” (ATB) Quarters Program. This series, which ran from 2010 to 2021, honors a national site from each U.S. state and territory. This specific coin celebrates the park in Indiana that commemorates the daring capture of Fort Sackville during the American Revolution.
If you are unsure if the coin you are holding is a George Rogers Clark or another ATB release, using a top coin identifier and value app is the fastest way to verify its origin. The Denver Mint (denoted by the ‘D’ mint mark) produced over 196 million of these quarters, making them very common in daily transactions across America.
The reverse design features George Rogers Clark leading his men through the flooded plains of the Illinois territory to launch a surprise attack on the British. When you look closely, the detail in the soldiers’ uniforms and the water splashing around their feet is a testament to modern coining technology. Many people use CoinKnow to zoom in on these details to check for potential errors.
Grading and 2017-D George Rogers Clark Quarter Value
When determining the value of your 2017-D quarter, the most important factor is its physical condition, also known as its “grade.” Because nearly 200 million were minted in Denver, collectors are only willing to pay extra for coins that look like they just came off the press. Most coins found in jars or piggy banks are “Circulated,” meaning they show scratches and dullness from being handled.
For those looking for precise data, the George Rogers Clark quarter collector prices show that as the grade moves from MS63 to MS67, the price jump can be significant. A coin with no visible marks under 5x magnification is a treasure.
To help you understand the pricing tiers, refer to the following guide for Denver-minted coins:
| Mint State (MS) Grade | Price Range (USD) |
|---|---|
| MS63 (Typical Uncirculated) | $0.75 – $1.50 |
| MS65 (Gem Uncirculated) | $5.00 – $8.00 |
| MS67 (Superb Gem) | $25.00 – $45.00 |
Where to Find the Mint Mark on Your Quarter
Identifying where your coin was made is crucial for value. For the 2017 series, quarters were minted in Philadelphia (P), Denver (D), and San Francisco (S). The “D” mint mark on the 2017 George Rogers Clark quarter is located on the obverse (the “heads” side with George Washington).
Look specifically to the right of Washington’s ponytail, just below the “In God We Trust” motto. If you see a small, clear “D,” your coin was struck at the Denver Mint. While Denver coins are generally common, some years see lower production numbers at one mint versus another, which can drive up collector demand.
Many beginners use the CoinKnow app to snap a photo of the mint mark area. The app’s high-resolution technology helps distinguish a faint “D” from a “P” or an “S,” ensuring you don’t misidentify a potentially more valuable San Francisco business strike or proof coin.
Comparison: 2017-D vs. Other 2017 Quarters
The year 2017 was a busy one for the U.S. Mint. In addition to George Rogers Clark, they released four other designs: Effigy Mounds (Iowa), Frederick Douglass (D.C.), Ozark Riverways (Missouri), and Ellis Island (New Jersey). Understanding the market value and rarity of 2017 quarters involves looking at the total mintage for each design.
The Denver Mint’s production for George Rogers Clark was fairly high compared to some of the earlier ATB releases. However, it still holds interest because of its dynamic military-themed reverse. Compared to the P-mint version, the D-mint is often found in slightly better condition in Western states due to distribution patterns.
| 2017 ATB Design | Denver Mintage (Millions) | Relative Rarity |
|---|---|---|
| Effigy Mounds | 210.8M | Common |
| Frederick Douglass | 275.8M | Very Common |
| George Rogers Clark | 196.6M | Moderate-Common |
Identifying Rare Errors on the 2017-D Quarter
For the everyday American, the real “jackpot” isn’t a standard uncirculated coin, but rather an error coin. Errors occur when something goes wrong during the manufacturing process. For the 2017-D Clark quarter, keep an eye out for “Die Chips” or “Double Dies.”
One common area for errors on this design is the rifles held by the soldiers or the landscape behind them. If you see a small blob of extra metal that doesn’t look like part of the design, it might be a “Cud” or a die chip. These can increase the value of a 25-cent coin to $5, $10, or even $20 to the right buyer.
Using CoinKnow can help you compare your coin against known error databases. Since minor errors are often overlooked by the general public, checking your change carefully can result in finding a unique piece of history that is worth much more than its face value.
Is It Worth Getting Your 2017-D Quarter Certified?
Professional grading by services like PCGS or NGC costs money—usually around $20 to $50 per coin. For a 2017-D George Rogers Clark quarter, it is usually only worth the investment if you believe the coin is in “Perfect” or “Near-Perfect” condition (MS67 or higher).
High-grade coins that receive a “Top Pop” designation (meaning they are among the highest graded known to exist) can sell for hundreds of dollars at auction. For example, an MS68 specimen would be a major rarity. If your coin has scratches from other coins (bag marks), it’s best to keep it in a protective folder rather than paying for professional grading.
If you are a casual hunter, simply storing your best-looking quarters in acid-free cardboard flips is a great way to preserve their current value without spending more than the coin is worth. Always handle your quarters by the edges to avoid leaving fingerprints behind!
FAQ
Q: How many 2017-D George Rogers Clark Quarters were made?
A: The Denver Mint produced a total of 196,600,000 George Rogers Clark quarters in 2017. This high mintage means they are readily available in circulation today.
Q: What is the most expensive 2017-D George Rogers Clark Quarter ever sold?
A: While most sell for under a dollar, high-grade MS67 or MS68 examples can sell for over $50 to $100 depending on the current market demand and the specific auction house.
Q: Are there any silver versions of the 2017-D George Rogers Clark Quarter?
A: No, the Denver Mint only produced copper-nickel clad versions for circulation. Silver versions were minted in San Francisco (S mint mark) and were specifically for collectors in proof sets.
Q: I found a 2017 quarter with no mint mark. What does that mean?
A: If there is no mint mark, your coin was minted in Philadelphia. Philadelphia didn’t start using the “P” mark on quarters consistently until much later, but in 2017, P-mint marks were standard. If it lacks a mark entirely, it could be a rare error or just heavily worn.
